T-8 Top Loading Furnace
Model T-8 is a top loading furnace with an 8″ (196 mm) diameter round heater.
Archives
T-6 Top Loading Furnace
Mid sized top loading furnace with a 6” diameter x 8” high (152 mm x 203 mm) hot zone. Maximum temperature of 3000°C with Graphite or Tungsten hot zone.
Thermomechanical Testing Furnace
Thermomechanical testing furnace for high temperature materials. The furnace chamber is designed to mount in different manufacturers’ test frames allowing a combination of thermal, environmental and physical test conditions.
Debinding furnace
Also referred to as delube or degassing furnaces, these relative low temperature furnaces are built to remove binders and lubricants from pressed powders, compounds or ceramics before further treatment.
Binate Furnace
Dual chamber furnace with one common control system and power supply, select hot press furnace or tube furnace for control.
Hydrogen Tube Furnace
Inconel, Quartz or Alumina Muffle tube for operation in an air, inert gas or Hydrogen environment. The heated section measures 24″ (610 mm) long and the muffle tube diameter can be 2″, 3″ or 4″ (51 mm, 76 mm or 102 mm).
Semi-conductor Wafer Indexer
Designed specifically for ion-beam processing of 3″ semi-conductor wafers at elevated temperatures. The indexing system allows precise control of the wafer position and permits batch processing of 8 wafers per run.
Neutron Beam Furnace
Custom furnace for mounting in a physical test frame. Test materials are subjected to neutron beam bombardment.
Steam Furnace
This custom furnace was designed for a government agency to process ceramic materials under special conditions.
Cryogenic Ultra High Vacuum Furnace
This ultra high vacuum system can reach pressures as low as 1E-11 Torr, using a three stage pumping system consisting of an oil-free roughing pump, turbo molecular pump and Ion pump.
