Call us
Call us business hours from 8AM to 5PM EST Tel (603)-485-2394
Sales & Engineering
Our sales and engineering staff is always at your disposal in the event you wish to receive a technical quotation or wish to obtain more technical information about our products. Our engineering office also is available to lend you our extensive experience and help you reach your project goals.
We primarily build furnace systems, but also are frequently engaged in designing and building partial systems to mount to or in other equipment: upgrading controls, automating process equipment, supplying heaters and shields, providing hydrogen kits, vacuum system, vacuum chambers, etc. Contact us
Support
We at MRF take pride in our products and work to make our design reliable, easy to operate and long lasting. If for any reason you encounter a problem with one of our products, and the operating manual does not state how to deal with the issue, you can get free technical assistance by calling MRF at Tel. (603) 485 2394 or Email Us. An engineer will discuss the problem with you and determine the necessary steps to alleviate the problem.
Please have your furnace serial number handy when contacting us.
Field Service
Field service is available if you request that someone assist you with the setup, maintenance, training or operation of our products. Field service is typically purchased for new furnace installs to ensure the product is set up and installed correctly, and to train operators, maintenance personnel and supervisors.
Maintenance contracts, emergency field service for troubleshooting and repairs, and upgrades or modifications are another reason our field service engineers are requested. An experienced engineer will travel to your location and perform requested work. Please contact us for setting up a schedule or to obtain field service rates.
- replace pumping fluids
- check and replace vacuum seals (O-rings)
- check hot zone condition
- clean or replace filters, relief valves and strainers
- calibrate sensors
- check safety interlocks
- check vacuum integrity
- other furnace specific items
Request a Field Service quote or Schedule Service
On-site Lab Furnaces, Toll work
For process development, research, low volume or short term batch production work, we have two Laboratory furnaces and an Arc melt furnace available to run your product. If a complete furnace system is not in your budget or if your furnace needs are temporary, renting time on our lab furnaces is an ideal way to perform your work without the investments associated with purchasing a complete furnace system.
Our rates include temperature profile programming, all utility costs including gas, use of our hot zone furniture* and any assistance you might possibly need. Our lab furnaces are located separately from our manufacturing environment and offer privacy and comfort. Run data is trended and stored, and is available to our customers (does not apply to our arc melt furnace). Email Us for more information or to request service rates.
- 2500°C maximum in Inert gas or vacuum, 2300°C in Hydrogen
- 3″dia. x 6″ high max sample
- Graphite or metallic tungsten/moly hot zone
- High vacuum Diffusion pumping system
- Inert gas, hydrogen or forming gas
- Fully computer operated
- HMI system stores run data on disk, available through email or USB drive.
* If your process produces substantial by-products or contamination, MRF may ask you to purchase a dedicated heater and shields to avoid cross-contamination with other customers work.
- 1650°C in Inert gas or Vacuum, 1500°C maximum in Hydrogen
- 10″x10″x10″ max sample size
- Metallic hot zone
- High vacuum system
- Inert gas, hydrogen or forming gas
- DAQ system stores run data on disk
* If your process produces substantial by-products or contamination, MRF may ask you to purchase a dedicated heater and shields to avoid cross-contamination with other customers work.
- Operating temperature: over 3500°C. (6332F)
- Bottom loading configuration.
- 360° viewing through Pyrex glass between top and Bottom brass base.
- Vacuum chamber construction.
- Copper stinger with tungsten electrode.
- Copper hearth plate 2.0” diameter (51mm).
- Power Supply: 300 Amp @ 60% Duty Cycle, 15Kva.
- Water cooled.
- Inert gas system with relief valve.
- Pumping system with roughing pump, vacuum gauge and valve.
* If your process produces substantial by-products or contamination, an additional charge may be added to cover cleaning time.
Free Quotes
Fill out our online form to obtain custom furnace quotes. If you have a specification outlining your requirements, or require an NDA to be in place before doing business, please call or email us these documents aside filling out the quote form. If you have interest in a specific furnace in our product catalog, you can also navigate to that page and request information for that model.
Open 8AM-5PM business days