Hydrogen Bell Jar Furnace
Hydrogen Bell Jar Furnace with an electric actuator to lift chamber and hot zone, gives full access to the loading area. A retort separates the work load from the hot zone and improves temperature uniformity.
Archives
3000C Top Loading Graphite Furnace
Our 3000°C top loading graphite furnace with a near 2 cubic foot work area will satisfy all your ultra-high temperature requirements. Operation in vacuum is possible but the maximum temperature is limited to 2200°C to maximize lifetime of the heating element and shields.
Wire oxidation furnace
This furnace has been specifically designed for oxydizing wire. The furnace has twelve open ended tubes to feed wires and features a gas system that allows control of the wire tube atmosphere. A unique temperature gradient is created by three independantly controlled hot zones and water cooled entrance and exit tunnels. The tunnel outer flanges adapt to a wire feed system.
Wire Annealing Furnace
Continuous feed wire annealing furnaces feature up to twelve open ended wire feed tubes. The wire inlet and outlet flanges adapt to a wire feed system (wire feed & pick-up). The furnace is set up vertically for a simplified wire support and tension system that uses gravity in it’s favor.
Crystal Growth Arc Melt ABJ-900-3
Crystal Growth Arc Melt Furnace ABJ-900-3 is the larger cousin of our TA-200, and produces crystals with the Czochralski method.
Crystal growth tube furnace
A crystal growth tube furnace incorporating a programmable motion system to “rock” the complete hot zone for long durations while maintaining temperatures up to 1300°C in an oxidizing environment.
4 Station Indexing Sintering Furnace
Our 4-station indexing sintering furnace is our highest throughput model tailored for high temperature sintering of electronic components. Four loads are processed simultaneously, creating a semi-continuous sintering process.
Two Station Sintering Furnace
Our two-station sintering furnace is based on our bottom loading sintering furnace, but is capable of simultaneously processing two loads, essentially doubling throughput within the same footprint. Our sintering furnaces are widely found in the electronics industry for sintering or heat treating electronic components at high temperatures. Cycles consist of atmosphere preparation, heating, rapid cooling and controlled oxidation.
Bottom Loading Sintering Furnace
Tailored for high temperature sintering of electronic components. Cycles consist of atmosphere preparation, heating, forced cooling and controlled oxidation. This furnace has a usable zone of 12” dia. x 22” high (305mm dia. x 559mm high), and is suited for large batch processing.
Multi Application Furnace
Front Loading versatile Laboratory or small batch furnace ideal for R&D. Large array of options and accessories.
